- Have any questions?
- +1 803.286.8614
- saleserv@carotron.com
US Drives, High Horsepower AC Drives
November 5, 2014Teachable Multi-Turn Position Sensor Connections and Dimensions
January 30, 2015Carotron Custom-Engineered AC and DC Drive Retrofit Packages
Call to Discuss Your Retrofit Needs Today! 1-888-286-8614
| Plastic and Rubber Extruder Drives | |||
|
Drive Retrofits, AC & DC
If the DC motor is in good shape, it is usually less expensive to replace the DC drive than to convert the system to an AC inverter and new AC motor. There are both electrical and mechanical modifications that must be addressed which can add significant cost beyond simply replacing the DC drive. Carotron has had good success in large plastics extrusion plants replacing several older DC drives of various manufacture. Most are ordered in the Chassis configuration, but we also offer complete drive packages, including fusing and a circuit breaker, in a Nema 12 enclosure. Most common sizes are in the 100 to 400 horsepower range. Read more here: https://www.carotron.com/articles/plastic-extruder-dc-drive Temperature Controller Upgrades (w/ data logging) Carotron can supply a complete system with our Data Logging Services, including On-site machine survey and specification; monitor/control enclosure with HMI; switches, sensors, transducers; data cables (for customer installation), and much more! Read more here: https://www.carotron.com/articles/data-logging-services/ |
||
| Blown Film Rewinder Drives and Controls | |||
 |
Update PLC-based Winders with Carotron Cortex LT® Industrial PID Controller
Increase web stability with Carotron custom controls |
||
| Tenter Frames | |||
| In-Cabinet DC & AC Drive replacements
Temperature Controller Upgrades (w/ data logging) Automated Pin/Clip Rail Synchronization Dancer and Load Cell Tension Control Upgrades Precision Temperature Zone Control Packages |
|||
| Alexco/Diversified Inspection Frames / Grading Frame Drive Retrofits |
|||
| Upgrade to current -production DC drives
Replace DC Drives with AC Add HMI with Data Collection and Production Reporting Precision Letoff Tension Control with Carotron Pneumatic Brake Controller Unwind upgrade with Safety Chucks and Air Shaft |
|||
| Multi-Capstan Wire Drawing Machines | |||
| Automatic Single-Head and Multi-Head Synchronization | |||
| Banbury Mixers (High Power to 2,000 HP) | |||
| High HP Drives for the Recycling Industry (up to 5,000 HP DC) | |||
| Energy-Saving 12-Pulse Design minimizes harmonics
Soft starting reduces Monthly Demand Load penalties |
|||
| Crusher and Shredder Feeder Drives | |||
| Add technology to minimize DC bus overvoltage tripping
Provide soft starting of high inertia loads to reduce electrical and mechanical peaks Modulate feeder rate to maintain high crusher throughput without overloading Work with existing drives (AC, DC, Hydraulic, Eddy-Current & Solid State Starters) |
|||
| Printing Line | |||
| Replace existing obsolete DC drives with Carotron ElitePRO® Digital Technology
Upgrade Pneumatic Brake Letoff Tension Control Convert Surface Rewinder to Center Rewind |
|||
| Card Stock Paper Laminator | |||
| Match and synchronize tensions in pre-laminated webs
Stabilize Speed and Tension in Laminating Section |
|||
| Traveling-Arm Sprinkler Pump Automation | |||
| Economically powered from 230 & 460 VAC Single Phase line
Up to 500 HP variable speed AC inverters Constant water pressure with varying flows Dual-Pump Duplex Designs available |
|||
| Solid State Starters for Induction, Wound Rotor, and Synchronous Motors | |||
 |
|||
| High-Power Resistive and Inductive Industrial Heater Power Supplies and Setpoint Controllers | |||
| Industrial-Rated Nema 12 Enclosures
AC Line Disconnect w/ High-Speed Fusing or Circuit Breaker UL 508 Equivalent Code Certification, if required |
|||
Carotron offers control retrofits and upgrades for all types of surplus, previously-owned, and vintage textile equipment.
- Woven and non-woven production equipment
- Complete finishing lines, including tenter frames
- Inspection machine drive retrofits – Specializing in Alexco, Diversified, and Krantz (inspection machine drive retrofits)
- Grading Frame drive retrofits
- Center and surface rewinders
- Dancer and load cell control, as well as sensorless Constant Tension Center Winders
- DC-to-AC Inverter Drive conversions
- Analog-to-Digital control conversions with production data display and collection
- Needle punch non-woven machines with cross-lapper and point-bonding calendar
Other Industries and Equipment
Plastic filament and rubber sheet extrusion Wire drawing lines – Single and multiple head High-horsepower Banbury Mixer DC drive retrofits Metal recycling shredder drives
Call Carotron today to discuss your Retrofit needs….
Local: 1 (803) 286-8614 or Toll-Free at 1 (888) 286-8614