>> Sensorless Flux Vector Control Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque.
>> Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up.
>> Ride-Through Provides smooth recovery to the previous set speed during a momentary power loss.
>> Holding Torque at Zero Speed Resists motor shaft rotation when the drive is in “Stop” mode.
>> Regeneration Protection Eliminates tripping due to high bus voltage caused by rapid deceleration of high inertial loads.
>> Undervoltage and Overvoltage Protection Shuts down the drive if the AC line input voltage goes above or below the operating range.
>> Short Circuit Protection Shuts down the drive if a short circuit occurs at the motor (phase-to-phase).
>> Basic, Programmable, Trimpot Adjustments Min. Speed, Max. Speed, Accel, Decel, Current Limit, Slip Comp.
>> Drive-Link™ Programming Kit Allows PC programming.
>> SIVFR Signal Isolator and Run Fault Relay* Provides isolation between a non-isolated signal source and the drive.
>> DIVF Modbus Serial Communication Module
>> Class “A” or “B” (CE) RFI Filter Installs on drive.