Precision Frequency to Voltage Converter
Model C11451-000

General DescriptionStandard FeaturesSpecificationsApplication ExampleDimensions/Connections


Specifications

AC INPUT

  • 115/230 VAC +-10%, 50/60 Hz, 9.2 VA max.

ISOLATION VOLTAGE

  • 460 VAC RMS, 1500 V peak

LINEARITY

  • +-0.2% of span with output range of 0 to 12VDC with a 10k Ohm load.

SIGNAL INPUTS

  • Square Wave: 10 to 12 V peak with 50% duty cycle at 100,000 Hz. max. 10 to 12 V peak with 25% duty cycle at 110,000 Hz. max.
  • Sine Wave: 1 to 20 V peak at 30,000 Hz. max.
  BUFFERED ARMATURE:

  • 0 to +10 VDC maximum for positive output
  • 0 to -10 VDC maximum for negative output

TRIM POTENTIOMETER

  • An external 10k Ohm potentiometer allows the output to be trimmed. A TRIM RANGE potentiometer on the C11451-000 unit controls the TRIM pot. range from a maximum of 0 to 100% or a minimum of 83 to 100%.

OUTPUT

  • Typical output is 0 to +-10VDC for non-regen operation and -10 to +10 for regen operation. The MAX. FREQ. Jumper, J2 and the GAIN adjustment pot. allow for a wide range of input frequencies.

VIEW INSTRUCTION MANUAL

View Brochure


General DescriptionStandard FeaturesSpecificationsApplication ExampleDimensions/Connections

Back to System Interface ComponentsBack to Product Line

Precision Frequency to Voltage Converters
Model C11451-000

Stay in touch with us

Have any questions?
Contact Us