Carotron Brand Products are Made in USAVoltage Multiplier and Divider Card
Model D11005-000

General DescriptionStandard FeaturesSpecificationsApplication ExampleDimensions/Connections


Specifications

A.C. INPUT

  • 115 VAC 50/60 Hz, internally fused at 0.3 AMPS

ISOLATION VOLTAGE

  • 2400V peak at 1 second or 1500 VRMS

LINEARITY

  • ±0.5% of 10 VDC span

SIGNAL INPUTS

  • Potentiometer Input (Input A & B) +15 VDC available to source a 2K to 10K Ohm potentiometer.
    The 10 VDC input range should be selected for this type of input.
  • Voltage Input (Input A & B)
    7 selectable ranges with 100K to Ohm input impedance.
Input Range Input Impedance
-100 mVDC to +100 mVDC 100K
-1 VDC to +1 VDC 1M
-2.5 VDC to +2.5 VDC 100K
-10 VDC to +10 VDC 10M
-2.5 VDC to +2.5 VDC 1M
-100 VDC to +100 VDC 10M
-250 VDC to +250 VDC 10M

Note: Negative input voltages cannot be used at Input A when the D11005-000 is used in the Divide Mode of Operation. input types

  • Auxiliary Input A
    This allows a fixed or variable signal (-10 VDC to +10 VDC) to be summed directly with the scaled input signal at Input A. Isolation is maintained from the Auxiliary Input A to Input B signals and the Output.
  • Auxiliary Input B
    This allows a fixed or variable signal (-10 VDC to +10 VDC) to be summed directly with the scaled input signal at Input B. Isolation is maintained from the Auxiliary Input B to Input A signals and the Output.
  • Summing Input
    This input allows a fixed or variable signal (-10 VDC to +10 VDC) to be summed directly with the output. Isolation is not maintained between the summing input and the output.

OUTPUT TYPES

  • Voltage Output
    This circuit allows the output to source a voltage level into a minimum resistance of 500 OHMS. (Lower load resistance may affect output linearity.)
  • Current Output
    This circuit allows the output to source a regulated current of up to 20mA into a maximum resistance of 500 OHMS. Using the BIAS Potentiometer, the output can source a 4-20mA signal.
  • Meter Output
    This output can be used to source a voltage level to a meter with a minimum 2K internal resistance. Its range can be set by the METER RANGE Potentiometer.

VIEW INSTRUCTION MANUAL
View Brochure


General DescriptionStandard FeaturesSpecificationsApplication ExampleDimensions/Connections

Back to System Interface ComponentsBack to Product Line

Voltage Multiplier and Divider Card
Model D11005-000

Stay in touch with us

Have any questions?
Contact Us