Voltage adjustable via Volt. Adjust potentiometer from 5 to 12 VDC, 100mA max
6 selectable gain ranges (via J1) with
Trim Potentiometer Input
Allows connection of an external 10,000 Ohm pot. to trim the output.
Selected by position V on J2. This circuit allows the output to source a voltage level of up to ±12 VDC into a minimum resistance of 600 Ohms. If resistance is too low, output linearity may be affected.
Selected by position I on J2. This circuit allows the output to source a regulated current of up to ±20mA into a maximum resistance of 500 Ohms. Using the BIAS pot, the output can source a 4 to 20mA signal.