±0.2% of span with output range of 0 to 10 VDC with a 100,000 Ohm load.
Square Wave: 10 to 12 V PEAK at 20,000 Hz max. Sine Wave: 1 to 20 V PEAK at 10,000 Hz max.
0 to +10 VDC for positive output
0 to -10 VDC for negative output
An external 10,000 Ohm, 2 Watt pot. allows the output tobe trimmed. A TRIM RANGE pot. on the C10330-000 unit controls the TRIM POT. range from a maximum of 0 to 100% or a minimum of 80 to 100%.
Typical output is 0 to +10 VDC for non-regen operation and -10 to +10 VDC for regen operation. The GAIN adjustment range, Jumper J3 and Jumper J 1 allow a broad range of input frequencies to be used. Input type refers to the shape of the input signal. Encoder inputs are typically square wave. Magnetic pickup inputs are typically sine wave.
The following table shows the relationship for Vout/Fin with the noted jumper settings: