Opal Pro MS6B Series Solid State Starter
Model MS6B

General DescriptionStandard FeaturesSpecificationsModel Ratings/Dimensions

Standard Features

• 200 – 600 VAC 3 phase universal voltage,50/60Hz (+/- 10%)
• Jog Speed:
– 14% of full speed forward,
– 20% of full speed reverse
• 500% overload for 30 sec. 115% continuous
• Single control card throughout complete range
• Class 10, 15, 20, or 30 electronic motor overload
• Current regulated closed loop
• Fault Display actual text
• Dual operation modes to match any application:
– Constant Current mode for light loads or limited power supplies
– Current Ramp mode for high inertia or heavy loads
• Soft stop
• Two or three wire control
• 120 VAC control inputs for: Start, Stop, Jog, Reverse, Reset, Enable
• Keypad and LCD display for starter setup, status and diagnostics.
• Hardware for Remote Panel mounting of keypad.
• MOVs and Incoming / Outgoing Connection Lugs.
• Bypass Lugs
• Simple user setup
• Single phase protection
• Phase rotation insensitive
• Instantaneous over-current trip
• Shorted SCR Fault output
• Shear pin Fault
• Dry contact relay outputs for:
– Fault, By-pass, Shorted SCR,Running, Reverse
• CSA and UL Approved
• 2 Year Warranty

View Brochure

General DescriptionStandard FeaturesSpecificationsModel Ratings/Dimensions

Back to AC Solid State StartersBack to Product Line

Opal Pro MS6B Series
Model MS6B (AC soft starter)

Stay in touch with us

Have any questions?
Contact Us