Standard NEMA 4 watertight rating for all enclosed models

Jumper selectable speed feedback to allow use of armature voltage, D.C. tachometer, or 60 pulse encoder (Reversing models will not operate in D.C. TACH feedback)

Start, Stop and Jog sequencing logic in all models

Five jumper selectable armature current ranges

Quality components such as I.C. regulators, metal film resistors, and cermet potentiometers for tem- perature stable operation

Inner current loop for fast stable response under varying load conditions

Power On/Off switch on all enclosed models for local safety power disconnect

Membrane switch panel with Start, Stop and Jog pushbuttons for all enclosed models

Torque/Taper models with provision for external torque pot. available in chassis or enclosed versions

Manual reversing models with Torque/Taper are available in chassis or enclosed versions

Process follower models are offered that offer manual/auto functions and isolated 0-10 VDC or 4-20 mA input to the drive for speed control in the auto mode

UL listing on 1/4 to 3 HP models