CORTEX® LT
Digital System Controller

General Description • Specifications • Application Examples • Dimensions/Connections

---

Specifications

A.C. INPUT Voltage Range – Single Phase (CLT2000-000) 115 VAC ± 10%, 50/60 Hz ± 2 Hz  D.C. Input Voltage Range (CLT2000-024) 24 VDC ± 10% PROGRAMMABLE INPUTS Analog 4 inputs available (12 Bit Resolution) Input range: 0 to 10VDC   Frequency 2 inputs available Input ranges: 42KHz Max, square wave Voltage: +15 VDC max Vil = 0.0VDC min to 1.1 VDC max Vih = 3.0VDC min to 15 VDC max   Digital 5 inputs available (optically isolated) Logic levels Sink Mode: Vil = +20 VDC max Vih = 0.0 VDC min to +17 VDC max Source Mode: Vil = +5.0 VDC max Vih = +8.0 VDC min to +30.0 VDC max

POWER SUPPLIES +10VDC @ 20 mA +24VDC @ 100 mA (isolated) +15VDC @ 100 mA +5VDC @ 100 mA (com C)   PROGRAMMABLE OUTPUTS Relay 2 outputs available Output ranges: Form-C contact, rated for 3A @ 115 VAC & 30 VDC Analog 2 outputs available (12 Bit Resolution) Output ranges: 0 to 10VDC, 20 mA max Frequency/Digital 1 frequency output available Output ranges: 0 to 5KHz 2 Digital outputs (only if frequency output not used) 16VDC max @ 20 mA COMMUNICATIONS 1 RS 232/485 for computer interface 1 RS 232/485 w/ Modbus RTU Protocol For Keypad or Touchscreen Interface 1 RS485/Modbus RTU for Expansion Card Interface DSP PROCESSOR 64 K words Ram 64 K words EE Prom 20 mhz

 

VIEW INSTRUCTION MANUAL / DOWNLOAD CORTEX® LT Link SOFTWARE / VIEW BROCHURE

 

---

General Description • Specifications • Application Examples • Dimensions/Connections

Back to System Interface Components • Back to Product Line

CORTEX® LT
Digital MicroController