A.C.
Input
115 VAC, ± 10%, 50/60
Hz, internally fused at 1 Amp.
Current
Input
3 selectable ranges, typical
output range is adjustable at 5 to 10 VDC with maximum input.
| Input
Range 1 to 5 mA 4 to 20 mA 10 to 50 mA |
Input
Impedance 1000 Ohms 270 Ohms 100 Ohms |
Frequency
Input
Accepts a sine or square
wave with a peak of 1 to 20 volts, input impedance = 100,000 Ohms, Vout/Fin
Range = .0028 to .014, max. output approx. 12 VDC. Max. input frequency
= 2,000 Hz.
Potentiometer
Input
+10 VDC, ±10% available
to source 2,000 to 10,000 Ohm, 2 Watt pot.
Trim
Potentiometer
Each output section accepts
an external 10,000 Ohm, 2 W pot. which allows the master signal to be
trimmed from 0 to 100%.
Voltage
Input
4 selectable ranges, greater
than 1,000,000 Ohms input impedance, max. output voltage approximately
12 VDC.
| Input Range 0 to 25 VDC 0.1 to 0.5 0 to 100 VDC 0 to 200 VDC |
Vout/Vin Range 0.2 to 1.0 0 to 50 VDC 0.05 to 0.25 0.025 to 0.125 |
Accel
Output
A 0 to +10 VDC @ 1 mA
signal is available from the Accel/Decel circuit to allow multiple Master
Reference Units to be ganged together.
Output
4 independent sections
with a typical range of 0 to +12 VDC @ 5 mA max.
Accel/Decel
Range
Independently adjustable,
linear operation, 2 selectable ranges: 1 to 5 sec. or 4 to 40 sec.
Note: The Accel/Decel
circuit only functions with the potentiometer input.
Linearity
±0.5% of 10 VDC span with
100K load.