BLAZER® IV
Series 1/4 - 5 HP Isolated Regen Drives
General Description • Standard
Features • Specifications • Model
Ratings/Dimensions • Connections
General Description
The Blazer IV Series of D.C. motor
controls provide full-wave, four-quadrant regenerative speed or torque
control for 1/4-5 HP shunt wound and permanent magnet D.C. motors.
The
BRC700 models are loaded with standard features that only Carotron could
provide reliably.
One very important feature of the Blazer IV series is
control circuit isolation. The control circuit of each model is completely
isolated from the power circuit.
This isolation protects reference circuits and feedback circuits from
possible damage due to accidental shorts to ground. Also, this standard
isolation greatly simplifies master reference, tachometer follower and
process control applications.
Another primary feature is an armature contactor for safety disconnect
during normal stop conditions. Logic in the BLAZER IV control
circuit assures that current flow to the motor has ceased prior to de-energizing
the contactors. This reduces electrical stress and increases contactor
life.
Encoder or pulse tachometer feedback is another key standard feature
in the BLAZER
IV BRC700 Series. This feature allows frequency signals required
for process monitoring to be used to improve speed regulation and simplify
system requirements. Other standard feedback methods available in each
model are armature voltage or 7 and 50 VDC tachometers.
An accessory
drive circuit monitor, Model DCM100-000, is available to assist in
set-up and troubleshooting by plugging into the control board to easily
access 20 separate signals.
Additional features of the BLAZER IV SERIES are listed
on the following pages. As you can see, these units are loaded with innovative
features that can simplify your drive applications.
VIEW INSTRUCTION
MANUAL
View Brochure
General Description • Standard
Features • Specifications • Model
Ratings/Dimensions • Connections
Back to Top • Back
to DC Drives • Back to Product
Line
BLAZER® IV
Series 1/4 - 5 HP Isolated Regen Drives
|